Gs1100gl

[babylon9484]

Hi All: I see a few questions on the float level for the carbs. so if I may add to them I appreciate it.

My manual "Clymers" pg.134, states the float level should be 21.4-23.4mm. My mechanic hates the clymer manual and would like to now if anyone can advise what the OEM manual says.

Thanks

[Nessism]

Factory manual says the same thing; 22.4mm +/- 1.0mm

[chef1366]

Tell your mechanic that the GSR said they are the right measurments.

[babylon9484]

Thanks for the answer. I thought that was the response I was going to get, but I had to ask.

[82Shafty]

Also inform your mechanic that as many have learned on here, float level does not always equal fuel level in the bowls.

Some cats set all fuel levels the same and wind up with different float levels.

Let the games begin. I set all of mine by float height, but I suppose if I get bored this winter I can check all the fuel levels and adj accordingly. My bike runs awesome...do all of the work myself.