.png "Powered by vBulletin")
Has anyone put a gauge cluster on a Suzuki GS850G from a different year? because i have a 1980 Suzuki Gs850G and i bought a gauge cluster off of a 1983 Suzuki GS850L. The only problem i have is someone who owned the bike before me cut the harness to hook up a gauge cluster. Does anybody have any suggestions for me on what to do. pm me please if you do
-
-
Get a wiring diagram. That will help you find which color wire goes where. I'd also get one for the guage cluster you have.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
You'll actually need a diagram from BOTH models, and then its relatively simple. I spliced together what i needed from an 80 750 harness into a 77 set of guages. You'll need both diagrams to know what colour wires went to what on which model, as they changed wiring colours from time to time. Look at the harness coming from your stock loom and then the harness on the gauges once you figure out what colours mean what on each. You'll likely have to push the pins out on one side of the harness to get them to match up on the other side with the corrosponding meaning, and thats about it. Not tough.Comment
-
late edition service manual for 850s will have all the wiring diagrams you needGS850GTComment
Comment