Announcement

Collapse
No announcement yet.

wont fire

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    See if it's leaking out the vent lines or the airbox.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #17
      both

      I think it is leaking out of both, but mostly out the vent..

      Comment


        #18
        Bowls are overflowing. The petcock is bad and probably either the o-ring on the fuel inlet (float seat) or the float needle and seat aren't seating.
        Have you cleaned the carbs? Replaced o-rings?
        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
        1985 GS1150ES stock with 85 Red E bodywork.

        Comment

        Working...
        X