Push the starter and nothing happens??

[Hoges]

Its a gsx250 82 model and the oil and neutral lights are on but push the starter and nothing, no clicks etc. Have checked the kill sw and its on to run, fuse is okay and battery is fully charged. Any wiring ideas I should be looking at here?

[twistedwankel]

clutch switch = jump it if you have to.

[Hoges]

Solved! It was the control G/Y and black that plug onto the starter soleniod underneath the main 12v lugs. Phew!

[Larry D]

Its a gsx250 82 model and the oil and neutral lights are on but push the starter and nothing, no clicks etc. Have checked the kill sw and its on to run, fuse is okay and battery is fully charged. Any wiring ideas I should be looking at here?

I would pull in the clutch when you hit the starter. Or, carefully remove the starter switch (button) and give it a good cleaning. The contacts get worn and/or corroded over time.