fuel guage

[Guest]

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

[SqDancerLynn1]

My 850 book says .5-118 ohms so it doesn't sound like it will your

[Gerry]

My 850 book says .5-118 ohms so it doesn't sound like it will your

Thanks for the info, I never thought to look in the manual and compare the difference in ohms.
I didn't understand how it worked but I think I have the idea now, in my book it says-

Full = 5-10 ohms
1/2 = 30-35 ohms
empty= 40-60 ohms

So I would need a gauge that will work in the 5 - 60 ohms range. Now for the hard part, to find one.

Thanks Gerry

[kz]

Re: fuel guage

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

Gerry,

Do you have any pictures of the instrumentation rebuild?

[1100ED]

Re: fuel guage

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

I think I have an 1150 fuel guage but there is nothing to mount it in.

[Gerry]

Re: fuel gauge

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

Gerry,

Do you have any pictures of the instrumentation rebuild?

I took a picture of the gsx cluster in place without any plastic on. I will finish the roll up with the plastic in place and post all the pictures. (maybe next week) The guy who built and set up the motor is giving it a once over this week.

Gerry

[Gerry]

Re: fuel guage

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

I think I have an 1150 fuel guage but there is nothing to mount it in.

Thanks for the offer Scotty but I still have my original cluster that I am going to take apart to mount the gear indicator and if I can use the gas gauge out of it I'll give it a try. I was hoping to find an aftermarket that would be easy to hook up.

Gerry

[1100ED]

Re: fuel guage

I just installed gsxr instrument cluster on my gs 1150 and I am going to miss my gas gauge. Does anyone know if this gauge will work on the 1150? Or do you know of any guages that will?

http://www.jcwhitney.com/product.jhtml?CATID=4573&BQ=jcw2

Thanks for any help

Gerry

I think I have an 1150 fuel guage but there is nothing to mount it in.

Thanks for the offer Scotty but I still have my original cluster that I am going to take apart to mount the gear indicator and if I can use the gas gauge out of it I'll give it a try. I was hoping to find an aftermarket that would be easy to hook up.

Gerry

Join the looking group. I have wanted to find a speedometer head that is mechanically driven((that i can mount within the original casing) for my gs 110e. I have a 16 inch wheel on it and the speedo it of by the diference between the 16 and 18 inch ront wheel.