What steering head bearings?

[skidMarkNZ]

Hi guys im going to replace the steering head bearings, old one got mutilated coming off, cant see any numbers, its for an 81 gs650gx.

http://cgi.ebay.com/ebaymotors/SUZUKI-GS450-GS550-GS650-GS750-GS1000-STEERING-BEARINGS_W0QQitemZ380083592143QQcmdZViewItemQQimsxZ20081122?IMSfp=TL081122105003r8334

looks like those are the same but i will just goto the local bearing wholesaler, anybody know the measurements i have to give the bearing people?

Cheers: Mark

wasn't in the manuals either.

[bonanzadave]

Most of us have used All Balls available just about everywhere (in the US)

http://www.goallballs.com/Bearings_seals.asp?page=STK

Oh, there is a dist in New Zealand....

www.whites.co.nz

[80GS1000]

Upper: 25 x 47 x 15
Lower: 30 x 55 x 17

They're tapered roller bearings.

http://www.ohiocaferacers.com/OCRStemSizes.pdf

[skidMarkNZ]

Upper: 25 x 47 x 15
Lower: 30 x 55 x 17

They're tapered roller bearings.

http://www.ohiocaferacers.com/OCRStemSizes.pdf

You my good sir are a god send

Just rang the local wholesaler an hes going to call me back with a price, wahoo

[80GS1000]

You my good sir are a god send

Nah, just had to learn *far* more than I ever wanted to about steering stem bearing dimensions when installing the GSXR front end on my GS. The bottom bearing was easy to find but the top was pretty much unobtanium.

[skidMarkNZ]

Nah, just had to learn *far* more than I ever wanted to about steering stem bearing dimensions when installing the GSXR front end on my GS. The bottom bearing was easy to find but the top was pretty much unobtanium.

local dealer has heaps of both in stock, i assume u had to do a mix and match funsies though lol

[waltfen]

I'm pretty sure that the numbers are 32005 and 32006.

[bwringer]

The All Balls kit includes new seals, which you don't get with generic bearings.

It's only about $30 for the All Balls kit.