Announcement
Collapse
No announcement yet.
cluth cable
Collapse
X
-
NES07DEZTags: None
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Oct 2003
- 17464
- Indianapolis
It's very straightforward -- are you having trouble with something, or do you just need to know that it really is as easy as it looks?
Also, it's a good idea to buy a genuine Suzuki clutch cable -- only a buck or two more than aftermarket, and much higher quality.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
-
Loosen the adjustment at the lever, then loosen the lower end, too. When the bottom end is loose enough, you can remove the barrel from the lever that pulls the clutch mechanism.
Installation is the reverse of these steps.
To adjust, screw the upper adjustment as far into the handle as possible. Remove virtually all of the slack by adjusting the lower end, then fine-tune at the top.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
The 850 clutch cable has an adjustment in the middle. You might want to make the coarse adjustment there instead at the end adjusters which are better for fine tuning.
Needless to say, you need to remove the fuel tank before performing this work. If you don’t know how to remove the fuel tank, or are afraid to learn, sell the bike and take the bus.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment