Need help ID'ing a AM windshield

[Imreallycrazy]

I'm not sure if this is the best section for this, but it seemed to match the most criteria.
I have an after market windshield that the PO add to my bike. I like the shield, but the supports are rusted and pitted and I'd like to replace them. The problem is that I can't find a manufacturer name on any of the parts.
Can anyone ID this 'shield?



If you need a closer shot of the parts, let me know, because I have it all unassembled right now.

[lifguardct]

Just a guess here but try national cycle.

http://www.nationalcycle.com/catalogue/StreetShield.shtml

[Steve]

No, National Cycle attachment points are glued to the plastic, these appear to be drilled through.

Slipstreamer is your next best guess. Check out the S-03 model on this page. The newer Slipstreamers are also glued, so this is likely an older model. It looks a lot like one I had on my Kawasakis back in the late '70s.

.

[BassCliff]

Hi,

I concur with Mr. Steve. I think it's a Slipstreamer. I used to have one on my bike that looked very similar. In fact, it was an S-03.



Now I have an S-06.



Mr. Imreallycrazy, yours doesn't look exactly like an S-03, it's a little taller. Perhaps an S-05? Check here: http://www.slipstreamer.com/Product/...g/touring.html

Thank you for your indulgence,

BassCliff