Q: Pilot FUEL screw- GS750B with VM26SS

[GS750]

Found the pertinent info..go to the carbs section and click on the sticky at top about settings per factory manuals and go to page 11..post # 43 just referemce the engine number on the flat area just above the clutch cover..I know it doesnt say a stock setting for the air screw, but it is generally recognized that a start point would be 1 1/2 turns out from lightly seated. of course the fine tuning process from that point will get her dialed in nicely.

Thanks Chuck, I looked at that sticky in the carbs section and was a bit a bit baffled because the settings in my bike, the settings in my genuine suzuki service manual, and the settings listed in the sticky are all different lol