.png "Powered by vBulletin")
Noticed on Z1 there are several Ohm ratings available for the coils...which is correct for my bike? How do I measure for the coorect ones?
-
-
The service manual spec lists the primary resistance rating as "Approx. 3 - 5 Ohms"
Not sure why but most people choose the Dyna Green 3 ohm coils when replacement time comes along for a bike with electronic ignition.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Going to do the coil relay mod prior to getting new coils to see if this helps as it seams easy enough and can't hurt.Comment
-
Dyna Green 3 ohm coils are a good choice or Accel supercoils will work. Measure your old coils to check the primary resistance.Comment
-
Have you already checked to see what voltage is available at the coils?Originally posted by Harry P. View Post
If it's already less than a volt different than battery voltage, the relay mod won't really help.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
Comment