Announcement

Collapse
No announcement yet.

Kawasaki cams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Kawasaki cams

    Wondered if there was any interchangeability between KZ1000 Cams and GS1000 cams. I periodically see Web cams or other aftermarket cams for the KZ float by. They sure LOOK the same in design and manufacture, question I guess would be the diameter, lobe height, distance between lobes, etc... Any chance they bolt up? I'm betting no, but thought it was worth asking.

    #2
    Well, since Web uses different part numbers (checked), leaning even more towards no, ah well, saw a set on the cheap, thought I'd check.

    Comment


      #3
      not really sure, spacing might be different. The cams sprockets are definately different. Kawasaki's use a 3 bolt cam gear versus suzuki's 2 bolt.

      Comment


        #4
        They will not interchange. The thrust surface of a Kawasaki cam falls in the middle of the bearing surface. Dar

        Comment

        Working...
        X