Announcement
Collapse
No announcement yet.
help with 85 gs 700es
Collapse
X
-
sparkmaster123
help with 85 gs 700es
hello everyone new to this sight, took awhile to approve me on the furum, but thats all good, just a few quik questions to all the experts here. well i have a 85 gs700es, i would like to take the fairing off to make it look more like the 700e kindof, but i would like to put dual headlights on it, does anyone know anywhere i could get dual headlights that are dot approved, most are not bright enough for me. another thing that i am wondering about is handlebars. i would like to find a way to mount up bars like mx bars because the ones i have are bent to far back towards me and are really uncomfortable. and third i was wondering what style and years of exsausts will fit on the bike because i do not like the exsaust that is on there it is ugly and sounds like crap. if anyone has any suggestions and pictures that would be much appreciated, also lots of poaple have been telling me cthat the dual headlights are to powerfull and that my bike will only run one
Tags: None
-
sparkmaster123
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
Member Groundshock here is looking to upgrade his E to an ES. Maybe you two can work out some sort of trade?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
seuadr
-
jmanz6
I have an '85 700E and I put ES bar risers on it because the E risers were too tall and wide for me. I like the feeling of the ES risers compared to the E risers. I think I posted a comparison pic between the two on another thread.
What kind of exhaust do you have now? Is it a 4 into 1 or the stock 4 into 2?
Comment
-
sparkmaster123
my bike
it is the original exsaust would like to make it sound better and look nicer, and as for groundshock, i dont know i am a member of a bunch of fourums and not many people will help me out, as for them riser that you have is there any way you can post a pic of them, i hate the way my handlebars are they are almost like they are pointing back at me. its really hard on my wrists cant ride to long or i have shard pains for days . what i would really like is mx style bars if possible, dont know enough about that part of the bike to know if it can even be done, all i know is the ones i have cannot be addjusted to go out straiter and that sucks
Comment
-
sparkmaster123
carbs
alos i was wondering about carbsm, cause i just had mine rebuilt twice and my bike wont idle at all i have to keep it revved up at the light so it wont die, and its really annoying because its hard to get it into gear without it dieing , and i end up having tons of cars backed up behind me
Comment
-
Maybe Posplayr will sell you his double headlight off his first generation Gixxer.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment