.png "Powered by vBulletin")
What is your source for ball hones out there ? What do you like to use ? For cylinders , guides , or anything else .
Terry
Terry
-
1980 Suzuki GS550E, 1981 Suzuki GS 1100EX all stock, 1983 Suzuki GS 1100EX modified, 1985 GS1150E, 1998 Honda Valkyrie Tourer, 1971 Kawasaki Mach lll 500 H1, 1973 Kawasaki Mach lV 750 H2. -
K&L supply. is where mine came from.SUZUKI , There is no substitute -
Might find one at Harbor FreightComment
-
Goodson:
I've used my Flex-hone for several GS850 rebuilds and never had a problem. Just chuck it in a cordless drill and keep it moving back and forth, and it lays down a very pretty crosshatch pattern in about ten seconds per cylinder.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!Comment
-
Terry, I use Sunnen. Ray.Comment
-
We sell them for valve guides, but don't use them on cylinders.
JaySpeed Merchant
http://www.gszone.bizComment
-
Search for Flex-hone. They're everywhere!1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Thanks for the input guys. I need a new one and wanted to know what you liked. Thanks.
Terry1980 Suzuki GS550E, 1981 Suzuki GS 1100EX all stock, 1983 Suzuki GS 1100EX modified, 1985 GS1150E, 1998 Honda Valkyrie Tourer, 1971 Kawasaki Mach lll 500 H1, 1973 Kawasaki Mach lV 750 H2.Comment
Comment