Coil testing/ignitor testing.

[Marine36]

I did a search and just to double check:

input 3-5 ohms and output 20-30,000 ohms.

I just the bike back together after adjusting floats, adjusting valves, changing handle bars. and she'll only fire on 2 and 3. I have no spark on 1 and 4. thats all the testing I have done. The ignition on this bike is a DYNA? with Accel coils and wires.

How do I test ignitor?

Thanks for all the input.

[Marine36]

Would you believe I found the test procedures on Mr. BassCliff's website?

I am astounded that one person has that much time to put together such a comprehensive resource and charge us nothing.

Thanks a bunch, Cliff!

[Marine36]

Is it bad when you test your coil and it shows an open?

[SqDancerLynn1]

If you are refering reading between to the two wires Yes it is bad. From the plug wires should read 15K- 30K ohms. BaseCliff's web site is a great addition to the forum. It is a collection of information from a lot of forum members. Cliff is kind enough to host it on his web space and keep it organized for everone to make use of it..