Stainless Cycles

[dwfranke1]

has anyone ever ordered from these people, and what do you think about them

[Larry D]

Got a linky ?

[dwfranke1]

https://www.stainlesscycles.com

[Tom MLC]

corrected link www.stainlesscycle.com

They sell on ebay. I bought my first kit from them. No regrets.

These days I use a local supplier. I get my SS fasteners over the counter now.

[JTsGS650]

I ordered a stainless steel bolt kit for the carbs on my 650, they advertise them for all CV carbs. It turns out that the drain screws on the 650 carbs are an oddball size and the ones in the kit did not fit. The kit also was short one lock washer. I emailed them and they told me they didn't have the correct size bolts for the drain screws but they did send me a bag of lock washers.

[Nessism]

If you want an engine bolt kit Burk’s Motorsports is a good choice. You can order direct or go though Z1 Enterprises. They also sell individual bolts if you know what size you need. I’ve ordered a few kits from them and have been impressed.

[TheBigRed]

If you want an engine bolt kit Burk’s Motorsports is a good choice. You can order direct or go though Z1 Enterprises. They also sell individual bolts if you know what size you need. I’ve ordered a few kits from them and have been impressed.

I'll second this... Ordered my kit from Z1, who had it shipped from their supplier (didn't know who it was at the moment). Complete, actually had a couple of bolts left over.

Amos

[glstine]

I got the engine and carb set from stainless cycles. I ordered for a 1980 550, when I got the kits the engine screws were all to short. I called them up and he asked me how many screws were on the signal generator cover. I told him three and he said that would make it an 81 engine and he sent out a new package that day and just asked that I return the original ones. Confirmed what he said about it being an 81 engine on the parts fische. I don't know if they are the least expensive but kudos on their customer service.

[jed.only]

ive ordered both my carb bolts and engine bolts from stainless cycle. superb quality, good price, fast shipping. bought off of ebay.

[dwfranke1]

just an update, ordered my bolt kit from stainlesscycle on the 17th and they have even processd it yet, has anyone else ever had this problem with them?
thanks