Announcement
Collapse
No announcement yet.
CV & VM Carbs
Collapse
X
-
CV & VM Carbs
What's the difference between CV carbs & VM Carbs? They're both vacuum carbs, right? Does a 1978 GS1000 has VM carbs?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
VM carbs have mechanical slides - twist the throttle and the slide lifts.
BS/CV carb slides lift due to vacuum - twist the throttle and a butterfly valve opens which allows the engine to draw more air thus lifting the slides.
All GS bikes larger than 450 used mechanical slide carbs through the 1979 model year. In 1980 they switched to CV type.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Originally posted by markwh View PostWhat's the difference between CV carbs & VM Carbs? They're both vacuum carbs, right? Does a 1978 GS1000 has VM carbs?
BassCliff will be along shortly with the 'official' welcome, but I will try to answer your questions in the meantime.
The difference between VM and CV carbs? First of all VM is a model name, CV is a type of carb. I have heard it as "constant vacuum" or "constant velocity". The carbs that Suzuki chose to use on the GS series are Mikuni BS carbs, which replaced the Mikuni VM series.
The biggest differences between the two are that the VM series carbs have throttle slides that are lifted directly by moving the throttle grip. The BS series open butterfly valves when the grip is twisted. The slides that are just upstream of the butterflies are lifted by vacuum when engine speed rises enough to create a vacuum behind the partially-closed slides. These carbs were more EPA-friendly in the time when emissions were coming under scrutiny because they eliminated the 'bogging down' or 'flat spot' when the throttle was suddenly opened.
Your 1978 GS1000 will have the earlier VM carbs. The easiest way to tell one set from another is by looking at the tops. The VMs have a rectangular, domed top that is held on with three screws. The BS carbs have a larger, mostly round, flat top that is held on with four screws.
Here is a parts diagram depiction of the VM carbs:
Here is a parts diagram depction of the BS carbs:
.Last edited by Steve; 02-24-2009, 08:48 PM.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
BassCliff
Greetings and Salutations!
Hi Mr. Markwh,
You'll find carb manuals for both the VM and BS(CV) Mikuni carbs on my website, as well as copies of the clean-up series for both. Let me just roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
Comment