Announcement

Collapse
No announcement yet.

GS750 CV carb body

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    GS750 CV carb body

    Does anyone know if the '81 GS750E CV carb body (32mm) is the same as the 1980 GS550E CV (32mm). Can one be substituted for the other. Thanks.

    Terry
    1980 Suzuki GS550E, 1981 Suzuki GS 1100EX all stock, 1983 Suzuki GS 1100EX modified, 1985 GS1150E, 1998 Honda Valkyrie Tourer, 1971 Kawasaki Mach lll 500 H1, 1973 Kawasaki Mach lV 750 H2.
    Tags: None
    #2
    Originally posted by headsbikesmopars View Post
    Does anyone know if the '81 GS750E CV carb body (32mm) is the same as the 1980 GS550E CV (32mm). Can one be substituted for the other. Thanks.

    Terry
    Pretty sure yes. Check the carb spec sticky on the top of this forum and double check the air jets to see if they are the same.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

      #3
      Yes, it is the same, as long as it came from the same position in the rack.
      As Nessism mentioned, you will have to move all your jets to the 'new' body, but you can not move the carb to another position in the rack.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment

        #4
        Thanks guys for your replys. Steve it looks like #1 and #3 is the same and #2 and #4 is the same casting. Carb #1 has the fuel tube sealed off with a 'cap'. Looks like that could be removed which would allow it to be used in the #3 position. Anyone ever do this ?
        1980 Suzuki GS550E, 1981 Suzuki GS 1100EX all stock, 1983 Suzuki GS 1100EX modified, 1985 GS1150E, 1998 Honda Valkyrie Tourer, 1971 Kawasaki Mach lll 500 H1, 1973 Kawasaki Mach lV 750 H2.

        Comment

          #5
          Which one do you need ? Or perhaps you need more than one.....
          Larry D
          1980 GS450S
          1981 GS450S
          2003 Heritage Softtail

          Comment

            #6
            Larry I need carb #3 , 1981 GS750EX 16 valve engine. 32mm CV. If you have one that would be great ! Larry PM me if you have one .

            Terry
            1980 Suzuki GS550E, 1981 Suzuki GS 1100EX all stock, 1983 Suzuki GS 1100EX modified, 1985 GS1150E, 1998 Honda Valkyrie Tourer, 1971 Kawasaki Mach lll 500 H1, 1973 Kawasaki Mach lV 750 H2.

            Comment

              #7
              i have moved a carb to another position, I did have to use some gas tank sealer to plug the gas channel. and you can drill the end carb gas channels out. When your Fu** and you have to make it work

              Comment

                #8
                Terry, I have one.
                1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                1985 GS1150ES stock with 85 Red E bodywork.

                Comment

                Previous template Next
                Working...
                X