Announcement

Collapse
No announcement yet.

1980 GS 750E Oil sump gasket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS 750E Oil sump gasket

    I have my oil pan / sump off and wanted to know if I have to use gasket goop sealer with the gasket when reinstalling, or is the dry gasket OK? I had a leak before taking the oil pan off so Im hoping to fix it. thanks Scott

    #2
    Either way is fine, but I'm pretty sure Suzuki didn't use anything on the gaskets originally. If you use sealer, only a very slight coating so it doesn't ooze out.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      You can use some sealer if you want, DON'T use silicon type. I like to use the brush on permatex

      Comment


        #4
        It's interesting how different boards have different recommendations. At the GSR, silicone sealer is frowned upon but on ex-500.com, they tell you to skip the gaskets entirely and just use silicone.

        Regarding silicone, quite a few OE auto makers use silicone instead of gaskets on things like oil pans and engine covers. I did the same several times when rebuilding engines such as an RX-7 engine. Worked great and never leaked.

        Flip a coin.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Greetings and Salutations!

          Hi Mr. ses1991,

          Let me roll out the welcome mat for you...

          Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

          Thanks for joining us. Keep us informed.


          Thank you for your indulgence,

          BassCliff

          Comment


            #6
            Thanks all for this help, It is appreciated!!
            Now I can get to work on getting back out on the road. Scott
            1980 GS 750E, Canadian version. ( I assume thats possible!)

            Comment


              #7
              Most people use too much silicon, it can float around inside the engine and clog the oil passages

              Comment


                #8
                Thanks BassCliff for the welcome page and web links! I can use this info right away.
                I'm wondering where you got your rear seat rack on your GS850? is it original? From looking so far it appears these OEM fit racks are hard to come by, unless a person makes one.

                Comment

                Working...
                X