Announcement
Collapse
No announcement yet.
whats the knob in the middle of the motor under the carbs for?
Collapse
X
-
kilog55
whats the knob in the middle of the motor under the carbs for?
so this has puzzled me for some time now is it a adjuster for something like the timing/cam chain? or whatTags: None
-
Bribird
-
Billy Ricks
-
imnowhooked
Originally posted by kilog55 View Postso this has puzzled me for some time now is it a adjuster for something like the timing/cam chain? or what
By the way...what exactly would happen if it did get turned??
Comment
-
Originally posted by imnowhooked View PostBy the way...what exactly would happen if it did get turned??
No harm in turning it while the engine is stopped, to verify that it is still free to move, but don't do it while the engine is running.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Oct 2003
- 17464
- Indianapolis
Stripped! Naked! Cam chain tensioner photos!
(Also, info on how to purchase and replace the seal and o-rings within this little mystery.)1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
Billy Ricks
The problem with turning the knob is if for any reason the pushrod is binding and you don't realize it then you have a problem. Binding probably isn't very common, but if you turn the knob you have to be prepared to service the tensioner for peace of mind. When carbs are off a bike it's really a pretty good idea to pull the tensioner off and check its operation.
Comment
-
Zooks
-
kilog55
-
donimo
-
imnowhooked
Originally posted by kilog55 View Postlots of good info there glad i asked thanks
Thanks for all the info everyone..very helpful!!!...As for the provocative Stripped! Naked! Cam chain tensioner photos Mr bwringer....I only read the article!!
Comment
-
mriddle
I just pulled my 83 out into the driveway and started it.
Rode down the drive and back and on the return I heard a strange sound that was related to rpm.
Shut of the engine and got off to find the knob from the Cam Chain Tensioner laying on the engine block .. loose .
The engine was running before I stopped but I did notice it backfired (which I had never noticed it do before).
What have I done to my poor bike ?
Comment
Comment