Announcement

Collapse
No announcement yet.

dumb question....stiff chain....normal?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    dumb question....stiff chain....normal?

    hi guys,

    putting new skins on the bike, and cleaning my chain, it is pretty stiff.....the chain and sprokets are reasonably new.....less than 6000 miles, and no obvious wear on the sprockets. it is a 630 o-ring chain...is some stiffness normal? i am cleaning it right now, but it seems pretty stiff still....

    greg
    1983 GS 1100 ESD :D

    #2
    O-ring chains have some friction but not sure what you mean by "stiff". Most likely everything is fine.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Maybe not enough slack in the chain. When you adjust it turn the wheel if you have it up on a centerstand and if you have tight and loose spots. You're better off adjusting where it's loosest.

      Comment


        #4
        Loosen it way too much so you get a big sag in the middle but the teeth still engaged. Spin the wheel and watch the links go by, it's very easy to spot kinked or binding links this way as they will stand out from the nice curve formed by good links.

        If you come across any binding ones, see if cleaning out any stuck grime will improve it. Otherwise ... time for a new chain.

        Comment


          #5
          Kerosene works best to clean it. I soak mine, then wipe it off, then blow it off. Then lube it up.
          85 GS1150E May '06 BOM
          79 GS1000S Wes Cooley Beast





          Comment


            #6
            Originally posted by renobruce View Post
            Kerosene works best to clean it. I soak mine, then wipe it off, then blow it off. Then lube it up.

            My reading on the query was that the chain itself is stiff, but not yet mounted on the bike. That would mean it has dirt or some hardened compound adding too much friction to allow easy bending.

            Easy bending/flexibility is critical, so I would have suggested this one, too.

            Bertrand Russell: 'Men are born ignorant, not stupid. They are made stupid by education.'

            Comment

            Working...
            X