Announcement

Collapse
No announcement yet.

big bore

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    big bore

    machine shop refuses to bore my 1100 gs for the 1166 wiseco kit, a 3mm overbore. has anyone had any overheating or distortion problems with this mod? monte

    #2
    Find another machine shop. That's just silly.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      What Bill said! I have done more than a hundred 3 mm overbore stock Suzuki blocks with NO problems! Ray.

      Comment


        #4
        big bore

        thank you Bill and Ray....I was concerned..found a good machine shop that has done this work before, and they agree to no probs....monte

        Comment

        Working...
        X