Announcement
Collapse
No announcement yet.
Very quick 550 question
Collapse
X
-
Zeevo
Very quick 550 question
Will cams from an 86 gs550 work on an 85 550? I was looking for some cams to use to be sent in and welded up and reground, and I can't seem to find any information on interchangability.Tags: None
-
p_s
-
BassCliff
Hi Mr. Zeevo,
You can also look up a part number on Babbitt's then plug it into the "Quick Part Lookup" to find which other bikes that part fits:
http://www.babbittsonline.com/pages/...1/default.aspx
Thank you for your indulgence,
BassCliffLast edited by Guest; 03-24-2009, 07:41 PM.
Comment
-
p_s
Originally posted by BassCliff View PostHi Mr. Zeevo,
You can also look up a part number on Babbitt's then plug it into the "Quick Part Lookup" to find which other bikes that part fits:
http://www.babbittsonline.com/pages/...1/default.aspxThank you for your indulgence,
BassCliff
Comment
-
BassCliff
Originally posted by p_s View PostInterestingly, Babbitt's shows that all the '83-'86 GS550 heads have the same cams and alpha-sports shows that they don't. The jetting changed a few points so I am pretty sure the cams must have.
Thank you for your indulgence,
BassCliff
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35601
- Torrance, CA
Looks like the intake cam changed, maybe for emissions reasons? Most likely the cams will interchange though.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment