Announcement
Collapse
No announcement yet.
Ac Generator wiring
Collapse
X
-
gsx1100
Ac Generator wiring
Hi ive been lurking around the forum for some time picking up info and ideas for my gs 1100 build, and this site has saved me some headaches. Upon rewiring my bike, I realized that my wiring to the ac generator was not marked or labeled. I know the three wires coming from the generator are yellow, but the wires to connect to them are yellow, white/blue and green/white going to the recitifier. My question is does it matter how i hook the three yellow wires into the other three? Thxs in advanceTags: None
-
Originally posted by gsx1100 View PostHi ive been lurking around the forum for some time picking up info and ideas for my gs 1100 build, and this site has saved me some headaches. Upon rewiring my bike, I realized that my wiring to the ac generator was not marked or labeled. I know the three wires coming from the generator are yellow, but the wires to connect to them are yellow, white/blue and green/white going to the recitifier. My question is does it matter how i hook the three yellow wires into the other three? Thxs in advance
BassCliff will be along shortly with the official welcome.
No it does not matter which of the wires goes where, but I would suggest that you find the three input wires to the r/r and connect the stator wires directly to them. Some bikes had a wire that went from one of the stator leads up toward the steering stem, then came back down before connecting to the r/r. That was for a feature that is no longer included, so if you can wire directly from stator to r/r, you will have better connections.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
gsx1100
thx so essentially there putting out the same juice when the bike is running. I just did not want to fry my rectifier or generator by hooking up the wires wrong.
Comment
-
Short answer is you can't hook it up wrong. All three should be yellow but have different colors for some reason. Here is a helpful diagram. It is for the Honda RR conversion but should answer your question
1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
-
focus frenzy
Originally posted by duaneage View PostAll three should be yellow but have different colors for some reason.
they didn't realize the joke would last so long.
Comment
-
There was switch on the handlebars that cut out one leg of the stator, the different color wires were to facilitate wiring that switch in. But it was a little dumb for sure. Aftermarket stators sometimes have three solid yellows.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
-
duaneage
Originally posted by duaneage View PostShort answer is you can't hook it up wrong. All three should be yellow but have different colors for some reason. Here is a helpful diagram. It is for the Honda RR conversion but should answer your question
a.) Where does the "Ground tab Green Wire' go?
b.) You don't show/use a ground strap between the R/R (-) and the Battery (-) ?
Pos
Comment
-
The Honda RR has a green ground wire. I did say this diagram was for the Honda RR install.
When you installed one of my kits how did you ground the RR?
Grounds should be as short as possible to the frame. If he has a OEM RR it may be a good idea to connect the black wire with a white stripe to a frame bolt. The frame and resulting 8 gauge wire going to the battery seems to be good enough to introduce the battery and RR to each other.
He asked about the three stator wires, I think we answered his question about it.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
-
BassCliff
Greetings and Salutations!!
Hi Mr. gsx1100,
Thanks for joining us. Let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
Originally posted by duaneage View PostThe Honda RR has a green ground wire. I did say this diagram was for the Honda RR install.
When you installed one of my kits how did you ground the RR?
Grounds should be as short as possible to the frame. If he has a OEM RR it may be a good idea to connect the black wire with a white stripe to a frame bolt. The frame and resulting 8 gauge wire going to the battery seems to be good enough to introduce the battery and RR to each other.
He asked about the three stator wires, I think we answered his question about it.
Pos
Comment
-
Originally posted by posplayr View Postaccording to duaneage:
Frame = Engine = Ground = negative post of the battery
Anything else?
How about Earth?
Use an ohmmeter to verify all this if your not sure.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
-
Originally posted by jknappsax View PostEarth: nice place to visit, not sure I want to live there. Oh, you mean what the British call a GROUND!
How ya been? We should go for a ride. Maro lives near you and is coming down my house Friday. You should come with him and we can play with the bikes in my garage.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment
Comment