Announcement
Collapse
No announcement yet.
Should I get a new OEM petcock or do you guys have any other suggestions
Collapse
X
-
cromwell1234
Should I get a new OEM petcock or do you guys have any other suggestions
Im replacing a bad petcock, its been rebuilt already on a 1982 gs1100e, should i stick with the suzuki oem or do you guys have any better suggestions, the original is about 70.00 at flatout, ===Tags: None
-
Originally posted by cromwell1234 View PostIm replacing a bad petcock, its been rebuilt already on a 1982 gs1100e, should i stick with the suzuki oem or do you guys have any better suggestions, the original is about 70.00 at flatout, ===
But, it just looks and feels so damn sexy...
Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
'83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB
-
Well, it's about $80 at Bike Bandit. You can shop around for better prices, but they will probably all be in the same ballpark.
Many on this board favor the Pingle petcock, because it's manually-operated and won't cause problems. There are also many on this board that recommend staying with stock petcocks because they are not manually operated.
It all depends on whether you want to train yourself to turn the gas on and off every time you ride. A stock petcock will do that for you.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
nisom512
Originally posted by Steve View PostWell, it's about $80 at Bike Bandit. You can shop around for better prices, but they will probably all be in the same ballpark.
Many on this board favor the Pingle petcock, because it's manually-operated and won't cause problems. There are also many on this board that recommend staying with stock petcocks because they are not manually operated.
It all depends on whether you want to train yourself to turn the gas on and off every time you ride. A stock petcock will do that for you.
.
Comment
-
cromwell1234
Thanks for the pic the pingel looks sweet, is it a bolt-on or do I have to make changes to the o-ring/attachment area under the tank???
Comment
-
Originally posted by cromwell1234 View PostThanks for the pic the pingel looks sweet, is it a bolt-on or do I have to make changes to the o-ring/attachment area under the tank???
I'd post a link, but I can't remember right now where I bought mine...Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
'83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB
Comment
-
A new Suzuki petcock will be fine for another 20 years or more if you don't let it sit for years at a time.
Pingle will too.
Will you always remember to shut it off?
And turn it back on?
Funny petcock story, my friend a long time ago got a Yamaha RD 350, when they were new.
He parked it at the little swimming hole, jumped in.
Another friend saw the bike leaking, shut off the gas.
The bike's owner finished swimming and hopped on, rode it up and down a couple tiny dirt hills showing off for the chicks, and took off up the bigger hill to the parking area. Halfway up the bike died from lack of fuel, stopped and rolled a few feet backwards in gear, then fired and ran backwards for about a second or two, throttle was open. Backwards down the trail, into the lake at about the same time that he fell over anyway.
The look on his face was never to be forgotten.
The chicks were well impressed.
I prefer Suzuki petcocks.
Comment
-
Originally posted by tkent02 View PostA new Suzuki petcock will be fine for another 20 years or more if you don't let it sit for years at a time.
Pingle will too.
Will you always remember to shut it off?
And turn it back on?
Funny petcock story, my friend a long time ago got a Yamaha RD 350, when they were new.
He parked it at the little swimming hole, jumped in.
Another friend saw the bike leaking, shut off the gas.
The bike's owner finished swimming and hopped on, rode it up and down a couple tiny dirt hills showing off for the chicks, and took off up the bigger hill to the parking area. Halfway up the bike died from lack of fuel, stopped and rolled a few feet backwards in gear, then fired and ran backwards for about a second or two, throttle was open. Backwards down the trail, into the lake at about the same time that he fell over anyway.
The look on his face was never to be forgotten.
The chicks were well impressed.
I prefer Suzuki petcocks.
I went with stock petcock. Bought it at www.cheapcycleparts.com
For some reason, can't find parts for pre '87. You might need to give them a call.
Comment
-
don_gibb6512
We Pass more Gas! Pingel Enterprise has long been known for our fuel valves, also known as petcocks. This product is one of the first motorycle parts from Pingel manufacturing. Our valves set the standard for quality and high flow with substantially higher fuel flow than any other fuel valve made for motorcycles.
They do have a vacuum operated version now. I chose the manual shut off. I love mine and don't mind having to turn it off. I prefer it that way.
Don
Comment
-
Z1 Enterprises sells a new aftermarket petcock for $48.75. http://www.z1enterprises.com/detail.aspx?ID=1715 Not sure if it's as good as new from Suzuki but I expect it would work fine.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment