Announcement
Collapse
No announcement yet.
Do you know where your calipers have been?
Collapse
X
-
Do you know where your calipers have been?
These is a picture of my OEM front caliper. This bike has always been garage kept but never had the brake fluid changed. It sat for 5 years in the 90's and the last two years waiting for the progressives, etc to show up. If you have not rebuilt your calipers or are at least flushing the system every couple of years this is what the inside of your calipers looks like. Worse if the bike has ever been outside for any length of time. I almost was going get lazy and try and run these until Fall after the mods but needless to say I am glad I decided to go ahead and do the rebuilds. If you have not done yours yet or don't know the last time they were done and by who, it is time.
82 GS850L - The Original http://s224.photobucket.com/albums/d...ePics067-1.jpg
81 GS1000L - Brown County Hooligan http://s224.photobucket.com/albums/d...ivePics071.jpg
83 GS1100L - Super Slab Machine http://s224.photobucket.com/albums/d...t=DCP_1887.jpg
06 KLR650 - "The Clown Bike" :eek: http://s224.photobucket.com/albums/d...nt=SERally.jpg
AKA "Mr Awesome" ;)Tags: None
-
Originally posted by twr1776 View PostDo you know where your calipers have been?
They live in their own little case, sitting right on my carb bench.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
This post should be a sticky! Tearing apart the caliper is the only way to clean out the gunk, flushing doesn't get it.
Don't forget to change the brake lines as well; the lines develop scale just like shown inside this caliper and changing the line is the only way to get rid of the gunk.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
nisom512
Originally posted by twr1776 View PostThese is a picture of my OEM front caliper. This bike has always been garage kept but never had the brake fluid changed. It sat for 5 years in the 90's and the last two years waiting for the progressives, etc to show up. If you have not rebuilt your calipers or are at least flushing the system every couple of years this is what the inside of your calipers looks like. Worse if the bike has ever been outside for any length of time. I almost was going get lazy and try and run these until Fall after the mods but needless to say I am glad I decided to go ahead and do the rebuilds. If you have not done yours yet or don't know the last time they were done and by who, it is time.
Ha thats nothing if I can find the pic some where when I took my CB550F's front apart it had some sort of weird jelly in there and no matter how much I ran new fluid threw the lines it still came up dirty......
Comment
-
That actually looks pretty good.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Smokinapankake
Originally posted by nisom512 View PostHa thats nothing if I can find the pic some where when I took my CB550F's front apart it had some sort of weird jelly in there and no matter how much I ran new fluid threw the lines it still came up dirty......
Brown Jello. Yuk. I went through the same thing with my 84 kat. Agree with Nessism - get new lines because that Jello doesn't wash out.
Comment
-
Tarbash 27
Just be careful of the oxidation, I was cleaning out a crusty master cylinder the other day and got a good wiff of the dust. I was choking on the stuff, its pretty toxic.
Comment
-
Zooks
I rebuilt the rear on my GK and the damn thing still sticks. Must have a small 'pit' or groove that I missed.
Oh well off it comes again.
Comment
-
Zooks, I ended up using a dental scaler type pick with VERY light pressure in the seal and dust boot grooves ONLY to get them clean. After I got the main junk out I cut some narrow strips of the green scrubbing pads and used the flat side of the pick to put pressure on the groove area only. That and lots of brake cleaner.82 GS850L - The Original http://s224.photobucket.com/albums/d...ePics067-1.jpg
81 GS1000L - Brown County Hooligan http://s224.photobucket.com/albums/d...ivePics071.jpg
83 GS1100L - Super Slab Machine http://s224.photobucket.com/albums/d...t=DCP_1887.jpg
06 KLR650 - "The Clown Bike" :eek: http://s224.photobucket.com/albums/d...nt=SERally.jpg
AKA "Mr Awesome" ;)
Comment
-
AOD
Comment