Led Bulbs

[bigbabee]

I want to replace the bulbs in my gauges with Led bulbs but I don`t know what Led bulb number to use in the speedo and tach. I have a 1979 GS 1000E

[Riding Again]

Welcome to the site. Be patient the honorable Mr. Bikecliff will send you his information packed MEGA-WELCOME. Take some time to visit it. By doing so, you will find an awesome library & references to other items. For example, Bikecliff's site a has this link to Mr. Matchless' great tutorial for building your own.

http://www.mediafire.com/?sharekey=3a0ab726f6117e564012e8015643d9c85717b31bfbde8fc1

If that doesn't work, take a bulb and measure the height etc. and see if this would work.

http://www.superbrightleds.com/BA9S6_specs.htm

I'm replacing all of mine as I also replace the guage faces with those I got from Rudy. I've got a couple of technical things to work out with what I want to do and then see if I can turn it into a tutorial as well. Don't wait for me however. Ride!!!

BTW, edit your signature to add the bike & year there and also your profile and add a general location. If you ever need other help, someone could be living nearby & could swing over AND you won't have to type the bike info again & again & again & again........

[Billy Ricks]

From what I've seen so far the base on the smaller automotive LEDs is too big for use in the gauges.

[TheCafeKid]

Why would you want to use those anyway? I would think that Led bulbs would be much more heavy than the stock ones

[jknappsax]

I must be dense; I just can't open the Mediafire files. I really want to look at that article about fabbing your own instrument LED illumination.

[Hammered]

Whats the stock bulbs base? All the bulbs have a base number like your tial light is a 1157. From there it should be just a quick Google search and order the one you want. Im going the same LED way myself.

[Giblet]

From what I've seen so far the base on the smaller automotive LEDs is too big for use in the gauges.

I have red LED bulbs from www.superbrightleds.com in my gauges. Haven't put them in the turn signals yet. The LED 1157 tail/stop light bulb I had got wet and I just haven't replaced it. They sell the flasher you will need to convert turn signals to LED bulbs.

[Giblet]

I want to replace the bulbs in my gauges with Led bulbs but I don`t know what Led bulb number to use in the speedo and tach. I have a 1979 GS 1000E

Do your bulbs have the brass, 1/4 turn base or are they the glass, minature wedge type?

[Riding Again]

I would think that Led bulbs would be much more heavy than the stock ones

Good Humor!!!!

[bigbabee]

my bulbs are the 1/4 turn type

[Grandpa]

Why would you want to use those anyway? I would think that Led bulbs would be much more heavy than the stock ones

They're also much louder!

[Giblet]

my bulbs are the 1/4 turn type

On my 81 I spliced in wedge type sockets from my GK gauges so I could use th0se type LEDs. If you can find a wire harness from an 82 or later you can use the ones from superbright.......

[BassCliff]

Hi Mr. bigbabee,

Don't forget, most of those files on Mr. Matchless' site and mine are PDF files so you'll need either Adobe Reader or Foxit Reader to view them. Let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff