Announcement

Collapse
No announcement yet.

Irregular spark???????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Irregular spark???????

    so i found that the gasoline was somehow mixed with the oil and i drained it and changed the oil filter it runs fine now BUT the starter something or whatever that produces the spark is irregular and i have a hard time starting it because of it. is there another way to start the bike or do i just need to replace the part?

    #2
    Hi,

    Have you looked at the spark?

    A faulty petcock combined with faulty float needle seal will cause gas to get into your oil. Have you addressed those issues yet? In other words, a new petcock and a complete carb clean and rebuild.

    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      Listen to Cliff, he is a wise man. Also, sounds like you need new plugs.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        Originally posted by Nessism View Post
        Listen to Cliff, he is a wise man. Also, sounds like you need new plugs.
        Pffft! Wise!?!? Only because I have tried to learn from you and others here in this outstanding community.


        Thank you for your indulgence,

        BassCliff

        Comment


          #5
          well my friends it seems the igniter has gone kaput on me and must be replaced

          also plugs are brand new.. petcock was fine


          again i thank you for your help and wisdom
          Last edited by Guest; 04-17-2009, 06:40 PM.

          Comment


            #6
            Originally posted by 1982gs650E View Post
            well my friends it seems the igniter has gone kaput on me and must be replaced...
            Ouch! I hate when that happens. Igniters are not cheap. How's it going?


            Thank you for your indulgence,

            BassCliff

            Comment


              #7
              Dyna S kit is about $120 at Z1 Enterprises. I don't think they list your model on the application chart but a few members around here have fit them. Doing a search should uncover some pertinent information.
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8
                found one for $150 and its on the way..after i put it in my bike will finally be up and running for the first time

                Comment

                Working...
                X