Announcement

Collapse
No announcement yet.

Valve adjustment and carb rebuild at same time?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Valve adjustment and carb rebuild at same time?

    Possibly a dumb question but can one do a carb rebuild and a valve adjustment at the same time? It seems like the time waiting for shims in the mail would match well with the time needed to soak the carbs.

    #2
    Sounds like a good plan to me. Don't forget to order: O-ring kit from cycleorings.com including intake boot O-rings, float bowl gaskets and pilot plugs from Z1 Enterprises or similar, and valve cover gasket.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      You bet!

      I did it when I bought each of my bikes. It will be double fun when you crank 'her' up!! (If you want triple fun, change the fork oil, too!)
      1980 GS1100E....Number 15!

      Comment


        #4
        Well it sounds like I have the makings of two or three nights of brew sippin' and bike wrenching. Sweet!

        Comment


          #5
          Make sure you stuff a rag in the cam chain tunnel and remember to remove it before buttoning things up.

          Comment


            #6
            Originally posted by chuckycheese View Post
            I did it when I bought each of my bikes. It will be double fun when you crank 'her' up!! (If you want triple fun, change the fork oil, too!)
            Quatro whammy, fix the brakes while it's down.
            http://img.photobucket.com/albums/v5...tatesMap-1.jpg

            Life is too short to ride an L.

            Comment


              #7
              Originally posted by Fishman View Post
              Well it sounds like I have the makings of two or three nights of brew sippin' and bike wrenching. Sweet!
              Do yourself a favor. Save the brew sippin' until after the wrenches are put away. You really want to be able to concentrate and pay attention to detail when doing things as detailed as valve adjustment and carb rebuilding.

              If you would like some help with your valve adjustment, send me an E-MAIL REQUEST (click on my name for E-MAIL ADDRESS info) for my Excel spreadsheet that will help you with the math to compute the necessary shims. It will also help you keep track of what shims are in your engine from one service interval to the next.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment


                #8
                And don't forget to balance everything out in the end (carb sync). I've always felt a valve adjustment and carb sync go hand in hand.

                Comment

                Working...
                X