Announcement
Collapse
No announcement yet.
tune up pointers and how to
Collapse
X
-
1980gs1100l
tune up pointers and how to
Hey im looking at going over this bike, its an 1980 gs1100 l, i intend on checking valve clearences, going through the carbs, changing from the current airfilter box to individual pod filters, changing oil/filter, and plugs anything else i should do while im here cause, ill already have the tank off etc., also can someone point me to the right direction to the carb rebuild series link and a link on how and what to set the valve clearences at. Thanks guysTags: None
-
Originally posted by 1980gs1100l View PostHey im looking at going over this bike, its an 1980 gs1100 l, i intend on checking valve clearences, going through the carbs, changing from the current airfilter box to individual pod filters, changing oil/filter, and plugs anything else i should do while im here cause, ill already have the tank off etc., also can someone point me to the right direction to the carb rebuild series link and a link on how and what to set the valve clearences at. Thanks guys
Here he comes now.
-
give the fuel tank a good look inside for nasty rust & rot. Do yourself a favor & do a proper tank clean & seal to eliminate that fine rust "silt" that will eventually clog your nicely cleaned carbs...
Check/clean the plug caps, as well as checking for good spark too.
Good luck,
mikeLast edited by hikermikem; 04-16-2009, 01:28 AM.'85 GS550L - SOLD
'85 GS550E - SOLD
'82 GS650GL - SOLD
'81 GS750L - SOLD
'82 GS850GL - trusty steed
'80 GS1100L - son's project bike
'82 GS1100G - SOLD
'81 GS1100E - Big Red (daily rider)
Comment
-
Changing to pods requires rejetting the carbs as well.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Get a manual. It'll help you alot. Pictures and everything.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
BassCliff
Hi,
Do you remember your mega-welcome? I hope I haven't done all that work for nothing.
Thank you for your indulgence,
BassCliff
Comment
Comment