Screw/bolt sizes?

[Rein]

Hey guys, got a 81 650GL, and still have those cheesy screws, and rusted exhaust bolts on there. What sizes are the screws on the carb tops, fuel bowls, choke rail, gang plate, and exhaust manifold? Any other screws worth changing to allen heads or hex bolts, and new screws for the gang plate and choke rail? I'm assuming that most screws, like the carb tops and bowls are the same throughout most GS's though, so it would be nice if you guys could chime in. I did try searching, but nothing concrete in my search.

[1978GS1000custom]

here you go, http://stores.ebay.com/Stainless-Cyc...QQftidZ2QQtZkm i have used them on most every bike, they are cheap, fast and reliable. stainless cycle.

[Larry D]

I don't know the exact sizes without looking through my notes, which are at home. There's some nice info here though......

http://www.thegsresources.com/_forum/showthread.php?t=137913&highlight=BOLT+SIZES

[tas850g]

i bought the ss kit for my bike from http://www.westcoastmc.com/

Worked out very well. You just need to keep track of which bolt came out of which hole.

[Rein]

Forgot to clarify, I got the engine cases already, just focused on the carbs. The hex bolts for the manifold are already rusted out, and I'm fairly sure they're going to break off.