Announcement
Collapse
No announcement yet.
Ignition Wires
Collapse
X
-
gus33
Ignition Wires
I'm building my own set of ignition wires to fit with my Dyna coils. I am using 7MM wire but I'm thinking 8MM wire might be stock for a 78 GS1000EC. Any thoughts? It took me all day to get the components but in the end, I can make the wires economically.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35588
- Torrance, CA
The stock wires are 7mm, or less maybe. Are you using solid core or suppression core wires, and what kind of spark plug caps? Standard rule of thumb is resistor caps with solid wires or the other way around.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
gus33
I`m using copper core wire with the stock caps(fifty cents a foot). I found the brass ends for the coil end at Napa for 30 cents each and the boots for 45 cents (canadian).
Comment
-
gus33
One other thing: I removed the metal casing on the plug caps due to the possibility of shorting when moisture is present.
Comment
-
reddirtrider
Run copper core wires without resistor caps and **** off all the cages!
Run whatever diameter fits into your dyna coils.
Comment
-
gus33
Both 7mm and 8mm fit into the Dyna coils, although 8mm is a more snug fit. I suppose that using wire larger than stock could carry more current. Are the stock caps resistor caps.(??) I was going to get some NGK caps but this town is not the best place to get things that are useful.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35588
- Torrance, CA
Originally posted by gus33 View PostBoth 7mm and 8mm fit into the Dyna coils, although 8mm is a more snug fit. I suppose that using wire larger than stock could carry more current. Are the stock caps resistor caps.(??) I was going to get some NGK caps but this town is not the best place to get things that are useful.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
gus33
Comment