83 GS550E Front Sprocket ??

[klarowe]

Does anyone know what the factory tooth count is on an 83 GS550e? I need to order a new front sprocket as mine is quite worn but i dont feel like taking it all back apart to count it. Also, if I'm going to be replacing it anyways is it worth it to change to a higher/lower count? I am not looking for more high end, but I wouldnt mind more lower end.
Thanks

kenny

[p_s]

14 teeth. I think all 530 chain front sprockets will work fine, but there are a few different bolt patterns for rear sprockets. I'm not understanding if you want shorter or taller gearing.

[klarowe]

im not really sure either... i would like more low end power... but i wont achieve much either way b/c i only plan on doing the front for right now.

[p_s]

You could get a 12 or 13-tooth front sprocket. Front sprockets are cheap if you want to experiment.

[klarowe]

for more torque/low end wouldnt I want to go taller??? say around 15 or 16? Or am I backwards??? lol

[klarowe]

nvmd.... you are correct.. i am wrong. What about the chain? I figure if Im going to be doing the front sprocket I might as well replace the chain too b/c it is very loose right now and Im not sure it will tighten correctly. I found a decently priced RK heavy duty chain on bikebandit for around $30. Is this too good to be true or is it a decent chain? And I do want a 530 chain correct? What about number of links???