whats my choices on hoses

[twiggy2cents]

my OIL hoses from the cylinder to the crankcase are what looks to be seeping from the crimp new ones are about $50 a piece oem. What other choices do i have??

[twiggy2cents]

bumpity bump

[ryonker]

Oil hoses? Is this for an Oil cooler?

Not sure what you mean.

Rick

[twiggy2cents]

sorry i think they are the drain they go from two banjo fitting the back of the jugs to the crankcase one on each head down to a banjo fitting on the crankcase stacked on top of each other

[ryonker]

sorry i think they are the drain they go from two banjo fitting the back of the jugs to the crankcase one on each head down to a banjo fitting on the crankcase stacked on top of each other

Can you post a picture? What are jugs ?

[Nessism]

Those are oil feed hoses which bring oil up to the cams. Much better design than the older GS engines which pump oil up though the head studs...and often leak.

Not sure what to suggest other than to say there was another GSR member here recently tring to have lines built at a local hose shop. Problem he ran into was finding the proper hose ends. You might want to try the search function and see what he came up with.

Edit: here is the thread... http://www.thegsresources.com/_forum...d.php?t=139670 You might want to drop Clone a PM and ask him what he wound up doing.

[twiggy2cents]

was his for the brake hose? i know its the same style i just want to know what to search for