any idea what brand or if this is any good

[Guest]

4 into 1 some rust, bent on the very end and scraped up on the bottom. How do you tell what it is off of?

[TheCafeKid]

Well, if the seller doesnt know what model of bike its for, youd need to measure the header spacing and see if it will match the spacing of your exhaust ports... If you need a decent 4-1 header, I have at least one laying around, a Kerker, in decent shape (better than that) I would be willing to part with for fairly cheap. Any header designed for a GS will fit any model GS at the head, but you might have to do a bit of fabing for a simple rear hanger...NOT hard at all.

[Billy Ricks]

Judging by the clamps I'd say it's a stock header. Off of what would be hard to say. Look at pictures on Ebay to see what it might have come off of.

[elevatorman71]

cafe what would you be askin for the header?

[Billy Ricks]

Well, if the seller doesnt know what model of bike its for, youd need to measure the header spacing and see if it will match the spacing of your exhaust ports... If you need a decent 4-1 header, I have at least one laying around, a Kerker, in decent shape (better than that) I would be willing to part with for fairly cheap. Any header designed for a GS will fit any model GS at the head, but you might have to do a bit of fabing for a simple rear hanger...NOT hard at all.

With the exception of '83 and up 700/750 models and smaller displacement GS's. They had smaller ports.

[scrapper]

I got it but wasn't that much. I don't think I want to mess with trying to put one on. I have other problems with bike to fix.