Announcement

Collapse
No announcement yet.

Carb diaphragms

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb diaphragms

    On the Mikuni's with the top diaphragms, where can you find new ones? I have two that are beginning to crack along the fold and I have sealed them temporarily with a light film of Permatex. So far they are working fine as far as I can tell but I am sure I will be searching for new ones soon. I did find some on a mail order place but they were around 80 a carb and this is way too steep. Any info on these soft parts? Thanks in advance. Peace

    #2
    Originally posted by gsinmaine View Post
    On the Mikuni's with the top diaphragms, where can you find new ones?
    I just did a run-through on my list of suppliers, here is what I found:
    81.14 Babbit's
    92.29 Bike Bandit
    80.03 Carolina Cycle
    89.25 Full Throttle
    86.21 Motogrid
    85.20 MR Cycle
    65.00 Parts-n-More
    89.16 Ron Ayers

    You could also try your local dealer, but I can just about guarantee that he won't be cheaper than any of the ones listed above, especially Parts-n-More.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      heres some

      try cycle-re-cycle they hame some for around $20 each. dave

      Comment


        #4
        Wow, that took alot of research on your part. I really do appreciate it. Will be getting in touch with Parts N More shortly. They list two diaphragms and mention every bike except mine specifically. I would think it would be the one listed for the 1100. I would imagine. I will call them and see what they think. Hey, thanks again! I knew about Ronnies but they run on the high side when it comes to parts. Now I have a great selection of part suppliers!!

        Comment

        Working...
        X