Dash panel identification.

[mark_vaughn]

I have an '81 1100E and from what I have seen online this is not the stock dash. Can anyone identify it?

Obviously this could change my thoughts on this engine, if this isn't the stock ODO then who knows what the miles are!

[posplayr]

GS1100EX? or other? If EX then not the right guages.
If L then maybe

[mark_vaughn]

GS1100EX? or other? If EX then not the right guages.
If L then maybe

1100EX


Any reason they wouldn't work correctly? I haven't had the bike running to know.

[rphillips]

If you get all the wires right, no reason it won't work, but the "E" models had a lot of warning lights the "L" models didn't have.

[mark_vaughn]

If you get all the wires right, no reason it won't work, but the "E" models had a lot of warning lights the "L" models didn't have.

That would explain the mess of wires that were not connected to anything...

It is going to probably be a full rewire. Just another item to add to the list.

[TheCafeKid]

Those are either pre 80 550/750L or post 82 1100G/850G/L gauges from what it looks like. I MAY have a set of 1100E or 750E gauges from that era available, I will have to check into it. They arent mine, so im not sure if the owner wants to let them go or not. they're spares, so perhaps. I will letcha know when i find out.

[mark_vaughn]

Those are either pre 80 550/750L or post 82 1100G/850G/L gauges from what it looks like. I MAY have a set of 1100E or 750E gauges from that era available, I will have to check into it. They arent mine, so im not sure if the owner wants to let them go or not. they're spares, so perhaps. I will letcha know when i find out.

If I can get this one working correctly I will keep it. I am not going stock on anything anyway.