.png "Powered by vBulletin")
I had to pull my starter cover from my 1150 due to a small screwdriver I dropped being wedged under the cover and stuck. So this rubber piece was just laying on the starter.
Anyone know what it is?
Anyone know what it is?
-
-
One of the vibration dampers from between the fins on the motor? -
A dampener. They go under the starter wedged against the crankcase.
At least that's where mine is.
It also looks like dampeners for the fins on the head.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
No wonder my bike vibrates so much.
Seriously though... Should I pull the starter and see if I can find a home for it? First I will look at the fins.Comment
Comment