Announcement

Collapse
No announcement yet.

1979 GS750 Engine noise & cam chain specs.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1979 GS750 Engine noise & cam chain specs.

    Hi guys,

    Got a rhythmic phish phish phish type noise that sounds like its coming from the valve train when the bikes warming up. Not there when cold but starts after about 2 minutes of riding and goes away after 10 -15. Sounds a little like a train going over tracks if that makes sense and its only there between 3000 - 4000rpm. It does sound mechanical rather than a leak.

    I've replaced exhaust gaskets and retorqued head (as there is an oil leak there, but no loss in compression or power). Also I cleaned and reset cam chain tensioner which moved freely. Last time I set the valves, a couple of the inlet clearances were at 0.09 mm - where specs say 0.03 - 0.08. That was 5000 kms ago so I am going to check valves again this weekend and fix them if they're still out. While the cover's off wanted to have a look at the cam chain, idler and cams.

    I can't find any measurements in my clymer manual for cam chain wear specs can anyone help me out?

    She's an 8 valve 1979 GS750 with 40,000 kms.

    Thanks in advance.
    1979 GS750E

    #2
    Free motorcycle service manuals for download, workshops and service manuals, electrical schematics and more from carlsalter.com

    Comment


      #3
      Basscliff is hosting the 750 manual. Search out his name and then go to his site to download. The spec lists a length between between a specified number of pins on the chain. The chains are pretty durable, you should be fine at only 40k km.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        Originally posted by Nessism View Post
        Basscliff is hosting the 750 manual. Search out his name and then go to his site to download. The spec lists a length between between a specified number of pins on the chain. The chains are pretty durable, you should be fine at only 40k km.
        Thanks for the replies. This manual doesn't have any measurement specifications either. But if the chain's most likely fine what else should I be looking for?
        1979 GS750E

        Comment


          #5
          Originally posted by Coady View Post
          Thanks for the replies. This manual doesn't have any measurement specifications either. But if the chain's most likely fine what else should I be looking for?
          Sorry for the bad suggestion. The early Suzuki manuals are not as complete as some of the later ones. The image below is from the 850 manual but the info should be the same as your 750.

          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            That is great. Thanks for going to the trouble of finding that. I imagine your right about them being the same as the 850.
            1979 GS750E

            Comment

            Working...
            X