82gs1100L CARB

[coyotehunta]

hi there i think i need needles/seats for my carbs.it;ll run fine about 2500 rpm. anything more seems its starveing for fuel.....thinkin it needs new needles and seats. any1 know cheapest place to buy them, thanks...

[Steve]

When you are trying to run above 2500 rpm, are you sitting still in neutral, modest throttle in second gear, full throttle in fourth gear?

We need to know these things because different parts of the carbs are involved.

How stock is your bike? Stock airbox or pod filters? Stock exhaust or a header? These would affect the jetting that is required.
If your bike has non-stock intake and exhaust, you also need non-stock jets in the carbs.

How long has it been since the valves have been adjusted? Should not really affect operation specifically above 2500, but generally needs to be done on principle.

.

[Nessism]

I'm guessing that the float needle and seat are not the problem but if you need parts... http://www.carbkitscapital.com/carb_...at=Float_Valve

[coyotehunta]

troubles still.........

hi there, thanks for the replys let me see if i can answer your questions.it;ll drive around ok through the gears and all longs ya dont go over 2500 3000, then its starvein for fuel. everythings stock carbs filters any ideas where im goin wrong......