Exhaust cross referencing

[twiggy2cents]

To all you modders out there. If i were wanting to get an exhaust for my bike and wanted something custom how would i go about cross referencing headers/whole systems between bikes, is there such a thing?

[tas850g]

I've read recently that you can go to one of the vendors microfiche (alpha i think still has oem parts numbers) that basscliff has on his home page and cross reference the genuine suzuki parts number from one bike to the next. If the parts number match then they are interchangeable. I haven't tried this though.

[posplayr]

what bikes, what exhasut; U wouldneed to be more specific unless you are looking for stock

[twiggy2cents]

the bike in my sig. and i was talking 100% general, if there was a website that has gathered various measurements of different exhausts not just suzuki

[twiggy2cents]

one thing being though is i think i want to keep it 4-2 being that its a "sport cruiser" and not a racer, i think single exhaust would look a little off on it

[posplayr]

Sorry, I have only been looking at crossing exhausts between 80-86 GS 1000/1100/1150 and 86-92 GSXR 1100's

[yaddy]

I've just fitted (as in a couple of weeks back) a Marshall 4-1 that was stamped GS550/650 onto an 82' KZ750 H4 DOHC. It fit nigh on perfect, the two outer downtubes blew a bit but after a little "tweak" they sealed no problem. Even the bracket for the rear of the silencer fitted perfect to the KZ frame, i couldn't believe my luck with that. So, in theory at least.......... maybe the KZ zuast would fit the GS? Would offer more options for you if that were the case. Obv i'm talking 4-1 systems here but i'd assume, it's possible to make a 4-2 system work out too.

[Colorado85gs550]

twiggy......my 4to2 is coming off soon and it is perfect with the exception of the small ground off edges on the tips where I've dragged it over in the corners

If you're interested, it would cause me to pull it sooner than later and get my custom 4to1 done!

I'll get it shipped to you for $125........

[Colorado85gs550]

Left Side:

[twiggy2cents]

i dunno yet being that im not in need of one yet just checkin ideas, can i get a sound clip of it?

[Colorado85gs550]

Right Side:

[Colorado85gs550]

I'll get a sound clip from my camera............BRB!

[Colorado85gs550]

http://s289.photobucket.com/albums/ll238/paulholcomb/?action=view&current=100_0934.flv

here is a short music clip of what sounds GOOD to me

It starts on the right side, then I put it next to the left side....

[Colorado85gs550]

and I only revved up to 7000rpm because its 9pm here!

[twiggy2cents]

i will have to think about it, i like the sound but i need to get my bike running first. Once i get it all squared away if you still have it i will look into what mod i would have to do to the hangers and what not