Announcement
Collapse
No announcement yet.
more speed!!
Collapse
X
-
biggoof
more speed!!
just got my 84 550l up and running(carb rebuild new non vacuum petcock),it runs really good but maxes out at 75mph! I hoped it would go a little faster than that.Once it hits terminal velocity it kind of surges then falls back then surges again..any ideasTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13968
- London, UK to Redondo Beach, California
Maybe some jetting issues with the main jet or air leaks or something. Surging means you're off somewhere.
We need a lot more details as to any upgrades, did you replace O rings in carbs, O rings behind intake boots etc.....
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
-
BassCliff
Greetings and Salutations!!
Hi Mr. biggoof,
The high-end "surging/hesitation" could be several factors, the worst of which would be your cam timing (chain off by a tooth?). Usually it's carb (main jets too small?) or air intake (leaks?) related. In rare cases it could be ignition related (bad ignitor, heat sensitive coils?). Are you running stock intake and exhaust?
Here is your official "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
biggoof
thanks for the prompt replys you guys are fast(unlike my bike)
when I cleaned the carbs I had to replace a torn diaphram..the jets are stock I attempted to purchase the intake o-rings from the guy on this site but he was out of stock however I tried spraying a light lube on them whilst it was idleing and detected no change in engine speed.
Oh it does sometimes take a while to return to idle when the throttle has been cracked open..
Comment
-
Surging at WOT usually means lean. Put a bigger main jet in there or you are at risk of going BOOM! Check the color on the spark plugs.
OR
You have an igniter with a built in curve advance. This could be bad.
OR
You have severe intake leaks. Do you have a hanging or surging idle?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
twiggy2cents
just ride with the choke on ;-) just kidding!! get a can of carb cleaner and spray that all around those boots, if it runs like crap and then recovers you need intake orings, you need them any way. If he is out of stock just get stock oem orings.
Comment
-
nelson269
-
tejasmud
"Terminal Velocity."
Welcome.
Hate to say, but yep, "terminal velocity" on a 550cc is about 75mph .
Pretty good I would say too, well, for a 550cc bike on the topend.
Teasing of course.
What are you running for filter(s)?
Comment
-
twiggy2cents
obviously you havent rode one, when mine is doing well it will pull the wheel on the 1-2 shift and easily goes up to 85+(i dont want to take it past that)
Comment
-
Do you have those weird dual quad carbs?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
twiggy2cents
yeah, their really not weird just different. They are normal cv's with a twist kinda like sierra mist with a hint of grapefruit
Comment
-
BassCliff
Originally posted by nelson269 View Postwhere do you get these bigger jets?? I've got some of the same problems
Here's one place:
Thank you for your indulgence,
BassCliff
Comment
-
Dan Ruddock
Does it pull hard in 1st gear. If yes you might have a fuel flow problem, kinked hose, needle valves, rust in tank. Dan
Comment
-
biggoof
thankyou all.I'm going to replace the intake orings and throw a new air filter on and see how she makes out
PS suzuki want $7 per oring....ouch
Comment
-
tejasmud
Originally posted by twiggy2cents View Postobviously you havent rode one, when mine is doing well it will pull the wheel on the 1-2 shift and easily goes up to 85+(i dont want to take it past that)
BigG,
Reason I ask about the filters/or air box would be an assumed lean condition. Surging is a symptom usually of lean, but rich condition as well in some cases.
Sounds to be getting additional air. Not really enough info, but first would be to change the o-rings, and ensure the air box side is all good assuming everything is stock.
If the exhaust "pops" a little when you let off the throttle in gear would be another indicator of leaks creating lean condition.
Comment
Comment