No power in the rain or when wet

[Coady]

I know you've replaced the plug caps. But I experienced this same problem in the wet with average condition caps and fixed it by smothering the inside of them with WD40. It would start misfiring every few months in the rain and I'd fix it the same way again...

[sparki]

you could try using a silicon sealer around the plug caps and where the leads / feed wires go to the coils.... see if that helps.

dyna coils do not come with the leads, they are seperate. mounting of the dyna coils can be done using the same mount points on my 1100, and 1150 but not sure about yours...

[avastyematey]

you could try plasti dipping them.

http://www.plastidip.com/home_solutions/Plasti_Dip