Can anybody confirm that these where made for this bike? I've sent message to Jardine. I'm thinking these mufflers are for larger cc bikes.
Announcement
Collapse
No announcement yet.
Jardine 2 to 1 Exhaust for '80 GS550L ?
Collapse
X
-
fgrable@sbcglobal.net
Jardine 2 to 1 Exhaust for '80 GS550L ?
I've found someone who says they have a set of NEW Old Stock Jardine 2 to 1 Jardine exhaust that fits a 1980 GS550L. These have turn out ends.
Can anybody confirm that these where made for this bike? I've sent message to Jardine. I'm thinking these mufflers are for larger cc bikes.Tags: None
-
no they will not work, your 550 is a 4 cylinder, you need a 4 into 178 GS1000 Yosh replica racer project
82 Kat 1000 Project
05 CRF450x
10 990 ADV-R The big dirt bike
P.S I don't check PM to often, email me if you need me.
-
fgrable@sbcglobal.net
I'm not that much of an idiot...
Thanks for trying but I know I have a 4 cylinder. THese Jardine mufflers have two inlets similar to the stock mufflers. One muffler for one side, one for the other. The seller is 1200 miles away so I can't lay eyes on it, only a pic.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Jardine and others used to make slip-on mufflers for GS bikes. You have to hack off the old mufflers first. I had a set of Wining Performance slip-ons for the GS550 but sold them before trying them - they had straight through mufflers and most likely will require rejetting.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment