Announcement

Collapse
No announcement yet.

Bandit 1200 Master Clinder on a 82'GS1100E

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Bandit 1200 Master Clinder on a 82'GS1100E

    Does anyone know if a Bandit 1200 Front Master Clinder will bolt up and work on an 82'GS1100E, I checked some threads but didn't find much, my front master is shot and I have access to a cheap fr. master cylinder from a bandit (01'), and would rather swap it, then rebuild mine which is in rough shape. Anyone do this or have any info on the subject???
    Last edited by Guest; 06-08-2009, 04:00 PM.
    Tags: None
    #2
    Originally posted by cromwell1234 View Post
    Does anyone know if a Bandit 1200 Front Master Clinder will bolt up and work on an 82'GS1100E, I checked some threads but didn't find much, my front master is is shot and I have access to a cheap fr. master cylinder from a bandit (01'), and would rather swap it, then rebuild mine which is in rough shape. Anyone do this or have any info on the subject???

    It will work fine on a double front disk set up. Dont use it if your bike has a single front disk.

    Earl
    Komorebi-The light filtering through the trees.

    I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

    Comment

      #3
      Originally posted by earlfor View Post
      It will work fine on a double front disk set up. Dont use it if your bike has a single front disk.

      Earl
      Ok earl, i will give it a shot, my GS1100E has dual disks and calipers on the front, along with that anti dive set-up---hope it works out--saves me time to ride!!

      Comment

        #4
        Originally posted by cromwell1234 View Post
        Ok earl, i will give it a shot, my GS1100E has dual disks and calipers on the front, along with that anti dive set-up---hope it works out--saves me time to ride!!

        I've already done it. That was not a guess.

        Earl
        Komorebi-The light filtering through the trees.

        I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

        Comment

          #5
          Originally posted by earlfor View Post
          I've already done it. That was not a guess.

          Earl
          thanks again

          Comment

            #6
            How do you like that Corbin seat on the "E"?

            Comment

              #7
              Earl, it will work on a single disc setup also but will just be weaker in braking power. Ray.

              Comment

                #8
                Originally posted by TooManyToys View Post
                How do you like that Corbin seat on the "E"?
                Hey I gotta be honest, I'm 6" 1', 230 lbs, and after about 1 hour on the Corbin--my ass needs a beer break, however the stock is sooooo...., much more comfortable for the long rides, I feel the Corbin's low center of gravity helps you ride if you want to be aggressive....get one used ....dont spend the full amount on a new one---

                Comment

                  #9
                  I'm 5'11" and 240 (now) and haven't had a problem with the stock seat, but have seen quite a few Corbins lately.

                  Comment

                  Previous template Next
                  Working...
                  X