Announcement

Collapse
No announcement yet.

no start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    no start

    my 84 1150 es with only 13,000 miles is starting to not crank over on the first try after i ride for a while. it happened 2 times now. the first time it was ok on the 2 nd try and the next week it took 3 times. it makes no sound at all. cold is good and when it does crank over everything is normal. im thinking starter brushes or the starter button switch ? got home and ovecorse it worked 5 times in the driveway. when it did this the second time i tried to see if the clutch switch was acting up but it did not matter. sure would be happy if i only need to clean the contacts on the starter button. that did the trick on the rear brake light last summer.

    #2
    It's not a lot of work to bypass the clutch switch in the headlight bowl - just unplug it & plug the 2 connectors back in (if it's the same as the earlier bikes).

    This would at least rule that out of the equation....

    Dan
    1980 GS1000G - Sold
    1978 GS1000E - Finished!
    1980 GS550E - Fixed & given to a friend
    1983 GS750ES Special - Sold
    2009 KLR 650 - Sold - gone to TX!
    1982 GS1100G - Rebuilt and finished. - Sold
    2009 TE610 - Dual Sporting around dreaming of Dakar.....

    www.parasiticsanalytics.com

    TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

    Comment


      #3
      Originally posted by salty_monk View Post
      It's not a lot of work to bypass the clutch switch in the headlight bowl - just unplug it & plug the 2 connectors back in (if it's the same as the earlier bikes).

      This would at least rule that out of the equation....

      Dan
      thanks for the tip, how ya doing. we need to ride this summer.

      Comment


        #4
        Thinking of doing an Angeles Crest Hwy in 2 Sundays time... Will put a post up on here... you up for that?

        Good luck with the bike. Intermittent faults are always a pain!

        Dan
        1980 GS1000G - Sold
        1978 GS1000E - Finished!
        1980 GS550E - Fixed & given to a friend
        1983 GS750ES Special - Sold
        2009 KLR 650 - Sold - gone to TX!
        1982 GS1100G - Rebuilt and finished. - Sold
        2009 TE610 - Dual Sporting around dreaming of Dakar.....

        www.parasiticsanalytics.com

        TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

        Comment


          #5
          i think so,as long as it is not fathers day

          Comment


            #6
            Starter

            I think your problem is with the starter. When it heats up, the armature expands and is more difficult to turn over. If it turns over well when cold and it's difficult when it's hot, that's a great clue. Do some searches; rebuilding it is really easy.
            1980 GS1100E, the latest of many.

            Comment


              #7
              It is father's day... Maybe we better stay away from that then. Perhaps Sat would work better for everyone.

              Dan
              1980 GS1000G - Sold
              1978 GS1000E - Finished!
              1980 GS550E - Fixed & given to a friend
              1983 GS750ES Special - Sold
              2009 KLR 650 - Sold - gone to TX!
              1982 GS1100G - Rebuilt and finished. - Sold
              2009 TE610 - Dual Sporting around dreaming of Dakar.....

              www.parasiticsanalytics.com

              TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

              Comment

              Working...
              X