Announcement

Collapse
No announcement yet.

Please Help, I am at a total loss. Aka a Half Moon Problem...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Please Help, I am at a total loss. Aka a Half Moon Problem...

    I have a 1985 gs550. I had a huge leak from my Left Front half moon gasket on the valve cover, so I went out and bought a new seal. I replacedit about fifteen minutes ago. I goteverything all buttoned up and started the bike, After about 3 minutes of idling, the Front Left half moon seal blew out, completely, Oil just spraying everywhere. This is the same problem I had before.

    I can't find anything anywhere about this problem, can someone please help me.

    #2
    If the crankcase breather is plugged up the engine will build up pressure inside. Worth checking out.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      where might that be?

      Comment


        #4
        Originally posted by avastyematey View Post
        where might that be?
        I'm too lazy to look it up.

        Is there a breather tube on the top of your valve cover? If so, remove the cover and make sure the passages are open and make sure the tube leading to the airbox is open as well.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Breather is on top of valve cover. Has a hose that goes to air box. If its plugged pressure will blow out seal.

          Comment


            #6
            that appears to have worked. thank you everyone. again.

            Comment

            Working...
            X