Announcement

Collapse
No announcement yet.

carb hard parts help!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    carb hard parts help!!!

    Hello everyone, I've got the carbs off my son's '79 gs550e and doing the dip, well, carb 2 has a bent/broken pilot screw-the one on the bottom at the float, it ran OK before, but i need to fix this,can anyone sell me just the pilot screw? also I'm wanting to do a 4-into-1 exhaust, anybody got one for sell to fit this bike?
    thanks for your time.
    Joel

    #2
    I think I might be able to help you. Send me a PM.

    Comment


      #3
      try midwest action cycle, bike bandit, or cycle parts nation for the part new

      Comment


        #4
        pilot fuel screw not available/shown in parts list

        Originally posted by cyclefvr2 View Post
        try midwest action cycle, bike bandit, or cycle parts nation for the part new
        the screw in question is not listed, so i may need a carb or if someone has one they are parting out, i only need the pilot fuel screw as seen in the vm rebuild resource-Paul Musser's write up.

        Comment


          #5
          These carb kits have the screws... http://z1enterprises.com/detail.aspx?ID=487
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            Originally posted by Nessism View Post
            These carb kits have the screws... http://z1enterprises.com/detail.aspx?ID=487
            but does this fit my carb? i had bought the same kit for the 79 550e and it did not come with that screw-and the kits came from them too!
            thanks for the reply
            joel

            Comment


              #7
              Originally posted by imlost View Post
              but does this fit my carb? i had bought the same kit for the 79 550e and it did not come with that screw-and the kits came from them too!
              thanks for the reply
              joel
              The 550 kit does not come with the fuel screws for some reason, but the 750 kit does and the screws are the same.
              Ed

              To measure is to know.

              Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

              Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

              Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

              KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

              Comment


                #8
                plot thickens

                thank you for your help, now i followed advice, got the carb kit for the 750 and put the pilot jet needle in, it stopped short,then i backed it out and saw that it was bent(crap), looked at the carb in the daylight and now see why it was bent,someone had put the first screw in to far, it broke off, the same or another person had put another screw in and broke it like i almost did, so this port is stopped up, and this carb is junk, will post request for carb it the want ads
                joel

                Comment


                  #9
                  Do a search because there are threads where people have been able to successfully remove the broken tip.
                  '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM) My Flickr site http://www.flickr.com/photos/soates50/
                  https://farm5.staticflickr.com/4306/35860327946_08fdd555ac_z.jpg

                  Comment


                    #10
                    Originally posted by Sandy View Post
                    Do a search because there are threads where people have been able to successfully remove the broken tip.
                    Search function is a beautiful thing! There used to be a nice thread with photos showing someone using a long awl/punch to drive the broken tip back out from the carb throat side.
                    Ed

                    To measure is to know.

                    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                    Comment

                    Working...
                    X