Announcement

Collapse
No announcement yet.

mikuni 29mm Smoothbores

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    mikuni 29mm Smoothbores

    Does anyone know where I can get carburetor rebuild kits for the Mikuni 29mm smoothbores?
    sigpic1979 GS 1000E:cool:
    Southside Chicago

    #2
    Here is where I got the parts to rebuild the ones on my bike.


    Comment


      #3
      You might try Sudco too. www.sudco.com Z1 Enterprises has some parts for them also

      Comment


        #4
        Only things you need are the O-rings and float bowl gaskets. I have all the various O-rings you need (send me a PM if you want to discuss) and you can cut the gaskets from gasket paper or order some from Z1 Enterprises or that link above. Z1 also sells the O-rings if you want to get everything from one source.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Schnitz has some of the parts. I was down there last week and they have a bunch of the bowl gaskets (I was looking for the VM26s, which they didn't have).

          Comment


            #6
            mikuni 29mm smoothbores

            Thanks for the info guys!
            sigpic1979 GS 1000E:cool:
            Southside Chicago

            Comment


              #7
              Mikuni 29 mm smoothbores

              Does anybody know if the float bowl gaskets are the same for the 29mm and the 26mm carbs? If not, what is the part number for the 29mm carbs float bowl gaskets?
              sigpic1979 GS 1000E:cool:
              Southside Chicago

              Comment


                #8
                Not the same. Sudco sells the gaskets and has the part number. I'm too lazy to look it up but you can.
                Ed

                To measure is to know.

                Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                Comment


                  #9
                  mikuni 29mm smoothbores

                  Thanks again for the info. I also found someone willing to help me with the rebuild. This is a great site. I can`t wait till I`m ridding again!!
                  sigpic1979 GS 1000E:cool:
                  Southside Chicago

                  Comment

                  Working...
                  X