If I'm braking hard with the front, it's quiet. It's only if I'm lightly using the brake that it's really squeaky... what causes this, and can I fix it?
Announcement
Collapse
No announcement yet.
Squeaky brakes
Collapse
X
-
Odinist
Squeaky brakes
My front brakes have been squeaky since last year. I just recently put new pads on my bike (both front and rear), and thought that this would eliminate the squeaks and squeals from the front brake. But, it didn't.
If I'm braking hard with the front, it's quiet. It's only if I'm lightly using the brake that it's really squeaky... what causes this, and can I fix it?Tags: None
-
Sure, you can fix it, just install some cross-drilled brake lines from KaleCo Automotive to relieve some of that excess pressure on the pads.
On a more serious note, take the pads out, make sure they are not glazed over. You can scuff them up a bit with some sandpaper, but be sure to not breathe the dust. Clean up the disks real good, then put about a 15-20 degree bevel on the leading edge of the pad. This helps keep them from chattering, which is the noise you are hearing. One other thing that will help is to get a pack of disk brake lube from your favorite auto parts store. They have little packs that are like fast-food ketchup packs for about a buck. One will do. Put a light film on the back and edges of the pad, wherever it contacts metal. Your brakes should be wonderfully silent now.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
machspeed
The squeaking is caused by a glazing on the rotor, from friction and heat of braking. You need to scuff your rotors with a piece of #400 sandpaper in a X pattern, it sounds a bit crazy I know but it will get rid the squeaking and also you stop better.
Comment
-
Odinist
D'oh, yeah Steve, I've used that stuff before when doing brakes on cars... I didn't even think about using it on my bike.
Mach, scuff up the rotors??? Madness! Haha, I'll give that a shot as well.
Comment
-
Originally posted by Steve View Post... just install some cross-drilled brake lines from KaleCo Automotive ...Originally posted by Odinist View PostD'oh, yeah Steve, I've used that stuff before when doing brakes on cars... I didn't even think about using it on my bike.
...
(I'll bet he was really talking about the grease.)
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17441
- Indianapolis
Which bike is this?
The early brakes with the round puck pads are notorious squeakers. Try all the tips above.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
Comment