.png "Powered by vBulletin")
The manual says that Suzuki Bond 1211 shoudl be used on the cam chain chamber "O" ring between the head and the cylinder. Anyone got recommendations on something I can substitute from my local NAPA or Carquest?
-
-
I use Hondabond on case seals and the like. I think it's all similar - maybe a different color. -
I use Yamabond on all of my bikes, is that against the rules ?
Comment
-
Last edited by Steve; 07-01-2009, 02:19 PM.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
I believe Threebond supplies their goo to all four. BTW, my manual says to use Suzuki Bond 1207B there. They're not all the same. If you look on Threebond's site, you can find a chart describing the different properties of each.
Does anyone know of a "local" supplier that might carry Threebond products? So far, everyone I ask hasn't even heard of them. My deadline's already blown, so if I can't track some down tomorrow, I'll have to order it in. But I'd rather spend Friday putting my bike back together than waiting... Maybe I'll try kayaking instead...Dogma
--
O LORD, be gracious to me; heal me, for I have sinned against you! - David
Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan
--
'80 GS850 GLT
'80 GS1000 GT
'01 ZRX1200R
How to get a "What's New" feed without the Vortex, and without permanently quitting the VortexComment
-
I know Z1 sells the threebond for our bikes, but you will have to wait for it to come in.Comment
Comment